| Laser Cutting | |||
| Item | Max | Min | Remark |
| Working Panel size(mm) | 600*500mm | 400*300mm | |
| Board thicknee(mm) | 0.5mm | 0.05mm | |
| Minimum cutting angle R | 0.025mm | ||
| Cutting the minimum size | 0.5*0.5mm | ||
| Cutting the thicker | 1mm max | ||
| After the cut / vertical degress | 100% | 95% | Follow material thickness |
| Cutting the smallest aperture | 0.05mm | 1 | |
| FR4 Blind Cut | 0.5mm以下 | ||
| Laser structuring | |||
| Item | Max | Min | Remark |
| Working Panel size(mm) | 600*500mm | 400*300mm | |
| Board thicknee(mm) | 0.5mm | 0.05mm | |
| Structure Area | 600*500mm | 0.1*0.1mm | Area |
| Ray carving depth | 0.5mm | 0.025 | |
| The thickness of the copper mine carved bottom | 0.018 | ||
| Ray carving depth tolerance | 0.025 | ||
| Laser drilling | |||
| Item | Max | Min | Remark |
| Working Panel size(mm) | 600*500mm | 400*300mm | |
| Board thicknee(mm) | 0.5mm | 0.01mm | |
| Hole size or drilling | 0.2mm | 0.5mm | Rd Test:25-30um |
| Ray carving depth | 0.5mm | 0.025mm | |